Orthogonal xyz positioning with high load capacity, fitting a 50mm bore.
CONFIGURATION
FEATURES
Orthogonal xyz motion
Will fit a 50mm bore
Robust package
XY using CBS10 positioners, non magnetic
Z using a CLA2601 positioner
XYZ scan range 1.6 micron at 4K
Load capacity 1kg
Resistive Linear Sensor option “RLS”
Gold coated OFHC reference frame is optional
DESCRIPTION
The CS021 offers orthogonal xyz positioning with high load capacity in a compact and robust package, fitting a 50mm bore. It combines 2 CBS10 positioners for xy motion with a CLA2601 positioner for vertical motion. The latter allows the CS021 to take loads up to 1kg. Sensors with absolute position output can be fitted on all axes when accurate positioning is required. The detachable reference frame offers a stable interface close to the sample table and is made of gold plated OFHC for highest thermal conductivity. It will allow users to attach parts at will, as needed in their experiment.
SPECIFICATIONS
| specs | unit | CS021 | CS021-RLS |
|---|---|---|---|
| SYSTEM SPECIFICATIONS | |||
| Active axes | - | 3 | |
| Type of motion | - | x, y, z, orthogonal | |
| Coarse range * | mm^3 | max 10 x 10 x 5 | |
| Scan range @ ambient | µ m^3 | 8 x 8 x 8 | |
| Scan range @4K | µm^3 | 1.6 x 1.6 x 1.6 | |
| X and Y positioner (including scanning) ** | - | CBS10 | |
| Z positioner *** | - | CLA2601 | |
| Z scanning actuator | - | piezo ceramic | |
| Z-scanner sensitivity @ ambient | nm/V | 66 | |
| Z-scanner sensitivity @ 4 K | nm/V | 13 | |
| Endstops **** | - | xy +/-5mm and z +/- 3mm | |
| Main construction materials | - | Titanium, Aluminium, Stainless steel | |
| Load capacity | grams | 1000 | |
| Operating temperature | K | 0.8-375 | |
| Mass | grams | 200 | 230 |
| DRIVE ELECTRONICS | |||
| Controller/driver | - | CAB-230(115), CADM2 | |
| Sensor readout | - | RSM | |
| Scanner module for z-scanner | - | PSM, PSMIL | |
| * See CS021 interface drawing for details | |||
| ** See CBS product page for detailed information. | |||
| *** See CLA product page for detailed information | |||
| **** xy endstops can be touched without problems. Touching z endstops is ideally avoided and can be prevented by using | |||
| the RLS position feedback option. Touching them will not cause damage but could require manual action to free it. | |||
Ordering Information
CS021 Cryo Stage 021
CS021-RLS CS021 incl. Resistive Linear Sensor on all axes
I1-CS021 Gold plated, detachable OFHC Interface/Reference Frame for the CS021
Request A Price List of the full product range
Please note that you’ll receive one price list for all Cryo & Nano Positioning products!
